Ps4 Remote Screen

When Sony announced in 2018 that remote play was now possible for PS4, we all rejoiced. However, the stipulations were too many. Apart from an outstanding internet connection, you also need at least 15 Mbps download speed. So to pair your PS4 remote, you'll first need to set it up for sharing mode. To do this, simply hold the Share button and the PS buttons simultaneously! This will cause the remote's front lights to pulsate very quickly for roughly 20 seconds. If there is a problem in connecting your PS4 console to the computer monitor using Remote Play, there is still hope – you can still play PS4 on laptop screen with HDMI using Capture Card. Here’s what you need to set this up.

Some PS4 users have reported to us that they need help in fixing Remote Play feature on their console that won’t connect to their PC. In case you did not know, you can actually play your favorite PS4 game on either a smartphone or computer even when you’re not in front of your console. All you have to do is to set up Remote Play on your phone or computer.

If you encounter connection issues or Remote Play errors during setup, or after using it for some time, this article should help.

Things you need for PS4 Remote Play

If you plan on playing away from your PS4, you can make use of its Remote Play feature. Below are the things that you should have to successfully do that:

Updated PS4 console.
Internet connected computer.
Good working PS4 DUALSHOCK wireless controller
USB cable to connect the controller to your computer. Or, a compatible wireless adapter to allow PS4 wireless connection.
PlayStation Network account.
At least 15Mbps download and upload internet connection speeds (for both the PC and PS4)

Causes why your PS4 Remote Play won’t connect

There are several possible reasons why PS4 Remote Play stops or won’t connect. Mostly, the issue is network setup related so it’s important that you make sure to check the status of your own local network ahead of time.

At other times, PS4 Remote Play may encounter connection issues or errors due to problems with the PlayStation Network itself.

For first time users, some may find out that they are unable to use PS4 Remote Play due to their computer’s security software.

Below are some of the common causes for PS4 Remote Play issues.

Internet connection is slow or intermittent.

In order to avoid having latency or lag when using Remote Play, you want to make sure that you have a fast broadband connection. Sony recommends that your PS4 has a minimum of 15Mbps. Anything slower than that can be problematic although I’ve personally been able to use Remote Play normally even though my PS4 speed test result shows that it’s only getting less than 6Mbps of upload speed.

For best results though, try to only use Remote Play when you have a fast enough connection.

PS4 software is outdated.

Most PS4 games and features that uses online functionality usually won’t work when the console’s software is outdated. Make sure that you manually check for software updates if you encounter Remote Play errors.

NAT type is strict or restrictive.

Some users may encounter “A connection to the server could not be established” error due to NAT type issues on the PS4. You should strive to have NAT Type 1(open) on your console although NAT Type 2 (moderate) is also okay. If your PS4 has NAT type 3 (strict), you will not be able to play with others online, talk via voice chat, or run Remote Play on your computer.

Random console or computer OS bug.

Sometimes, electronic devices may develop flukes. Temporary bugs are usually fixed by simply rebooting the device so make sure to restart your PC and PS4.

Local network issue.

Ps4 Remote Play Full Screen

Issues with your local networking devices can cause Remote Play to cut off or not load. Make sure that your home network is fast enough and does not disconnect frequently. Intermittent connection issues can cause connection time outs, which can make Remote Play virtually unplayable.

Security software blocking the connection.

If you’re getting a 88010E0F error when setting up Remote Play for the first time, it’s more likely an antivirus or firewall issue. You can try to disable your antivirus or firewall temporarily to check if that’s the case.

Make sure to turn your security software back on after testing.

PlayStation Network is down.

Remote Play may not work if there’s an issue with its servers. You can check PlayStation Network status if you have trouble connecting with Remote Play.

What to do if PS4 Remote Play won’t connect

If you’re encountering an error with Remote Play, or if the feature suddenly stops working for no apparent reason, the following solutions should help.

Check the PlayStation Network status.
Before you troubleshoot your PC or PS4, make sure that you visit the PlayStation Network status page to see if there’s any issue from Sony’s side.
Check your internet connection speed.
Slow or intermittent connection speed can significantly impact how Remote Play works. Make sure to run a connection speed test on your PS4 first to see if it’s getting the minimum 15Mbps download and upload speeds.
Your computer should also meet with the minimum speed requirements.
To check for a possible intermittent connection issue, you’ll need to observe your network. Using your other devices (smartphones or computers), try to see if the connection keeps dropping for a few hours. If internet connection is unstable or constantly disconnecting, you’ll need to fix this issue first in order to reliably use Remote Play.
Use wired connection.
If you are using wireless or wifi connection with your PS4, it’s possible that there may be wifi signal interference that causes the connection to drop. Try using an ethernet connection from the router to your PS4 before attempting to use Remote Play again.
If a wired connection is not possible, move the PS4 closer to the router so as to ensure that it gets a good wifi signal.
Update your PS4 software.
One of the simplest ways to keep bugs away is to ensure that your PS4 runs the most recent software. To manually check for software updates:
-Go to your PS4 Home screen.
-Go to the Settings Menu.
-Select System Software Update.
Restart Remote Play on your PC.
If Remote Play still won’t connect, make sure that you restart it. On your computer, open the Task Manager (CTRL+ALT+DEL), select PS4 Remote Play under the Processes tab, then hit the End Task button at the lower right.
Reboot the computer.
If restarting the Remote Play application will not fix the error or connection issue, the next good thing that you can do is to restart your computer. This ensures that you address possible temporary bugs with your PC that might be interfering with Remote Play.
Power cycle your local networking devices.
While your PC is restarting, take the time to also refresh your network connection. To do that, you want to unplug your modem and/or router from the power outlet or strip for about 30 seconds.
Disable your antivirus and/or firewall.
For some, disabling their security software like antivirus or similar fixes Remote Play issues. If your computer’s firewall is active, you should consider turning off that too for testing purposes. Or, you can make an exception in your firewall settings to allow Remote Play to establish a connection. Use Google to know how to do this suggestion.
Delete and reinstall Remote Play.
If all the possible causes have been checked and not one of the solutions above has helped so far, consider deleting and reinstalling Remote Play.

1. Bluetooth Setup and Settings

First up, if you've bought a new USB Dongle, you'll want to set this up yourself and continue with the next paragraph. These often either have a plug-and-play feature, or require a software download to install.

With your Bluetooth hardware set up, go to your Bluetooth Settings on your PC. If you're not sure where this is located, you can just press the Start button and search for Bluetooth, and you'll find Bluetooth Settings easily.

2. Connecting your remote

When you open your Bluetooth Settings, your device should start scanning for Bluetooth devices immediately. So to pair your PS4 remote, you'll first need to set it up for sharing mode. To do this, simply hold the Share button and the PS buttons simultaneously!

This will cause the remote's front lights to pulsate very quickly for roughly 20 seconds. This is much quicker than the normal on-and-off pulsing lights, so make sure you hold the buttons simultaneously to get your remote in sharing mode.

You should now be able to find your PS4 remote with your Bluetooth Settings.

You can now click on the Wireless Controller option on your PC, and then click pair. This should stop your Remote's light from flickering, and set it to a static blue light. Depending on your PC, it could take a few seconds to a minute for the device to get paired, at which point the Bluetooth Settings status will show up as Connected.

3. Driver Download (InputMapper)

Next up, you need to head to InputMapper's download page here, and download the latest version of the software. You'll probably want to stay away from the Alpha, so just download the main version of the driver, which looks like this:

Ps4 Remote Play Screenshot

When that's taken care of, go through the simple installation, and make sure you have a Shortcut to the app on your Desktop. (This app is completely safe; we've used it in over a dozen devices without any issues whatsoever)

4. Connecting your device to InputMapper

If InputMapper didn't open on its own, open it from your Desktop. The software should instantly recognize your device, and show you a screen like the following;

If your remote isn't shown in the software, ensure it is turned on by pressing the PS button. If the Remote is on, but not connecting, try closing InputMapper completely, and opening it again.

And that's all!

If your PS4 Remote is showing up on InputMapper, you're good to go, and can access your games as normal.

Ps4 Remote Screen Apk

To turn your PS4 Remote off, you can simply go to InputMapper, click on your Remote and click on Disconnect Bluetooth.

To start it up again, you simply need to open InputMapper, and then turn your Remote back on.

(Note: Do not disconnect or unpair your Remote from the PC, as this would mean you'd need to run through the setup again.)

You can charge the Remote normally, by connecting it to a USB socket on your PC, or to the wall. Keep in mind that if you connect it back to a PlayStation, you'll need to run through the Bluetooth Pairing again, as the device can only pair to one console at a time.

Ps4 Remote Play Screen Resolution

You can also use these settings to connect multiple Remotes to your PC. If your Bluetooth Adapter doesn't support multiple connections however, you might have to buy additional Dongles to connect the different devices.

If you have any questions, or ran into any problems, please let us know in the comments section below, and we'll try our best to get back to you with a solution. If you liked this guide, please do share it with your friends.

Capload973